DateCityStateEmployerBody PartEvent
2021-10-07Sand SpringsOkWebco Industries, IncMultiple body partsFall onto or against object on same level, n.e.c.
An employee was removing grates from inside a parts washer containing about 12 inches of washing solution heated to 160-180 degrees. The employee slipped and fell into the washer and suffered second- and third-degree burns to his left forearm, both legs from the knee down, and his right hip.
2021-02-10Sand SpringsOkNOV Fiber Glass Systems, LLCUpper and lower limb(s)Ignition of vapors, gases, or liquids
An employee was grinding on a metal resin pan and a spark ignited a 5-gallon bucket of solvent. The burning solvent splashed onto his right leg, causing burns to the right leg, right hand, and right arm.
2020-04-28Sand SpringsOklahomaE.A. Renfroe & Company, Inc.BrainOther fall to lower level 21 to 25 feet
An employee fell from a two-story roof to the ground while conducting an insurance inspection, suffering injuries to the head, neck, back, and left leg and a brain bleed.
2020-04-19Sand SpringsOklahomaWebco TubeMultiple body partsDirect exposure to electricity
An employee was securing a dead front panel on a panel board when an arc flash occurred, causing second and third degree burns to the employee's hands, arms, and face. The employee was hospitalized.
2020-02-26Sand SpringsOklahomaDavco Mechanical Contractors, Inc.Finger(s), fingernail(s)Caught in or compressed by equipment or objects
An employee was installing an exhaust fan belt when their fingers were caught between the belt and the pulley. The ring and middle fingers on the right hand were broken and the right pinky finger was amputated above the fingernail.
2019-04-08Sand SpringsOklahomaWEBCO INDUSTRIES INC.,SOUTHWEST TUBE DIVISIONFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was tightening the bolts of a saw blade on a tube cutoff machine. The blade was turned, and the employee's wrench followed its movement. His left little finger was crushed between the wrench extension and the framework of the machine. The tip was amputated.
2019-01-31Sand SpringsOklahomaA-1 Refuse, LLCJaw, chinStruck by swinging part of powered vehicle
An employee was operating a trash bucket and had raised the bucket to open the side trap doors in order to scrape out debris when the handle that raises/lowers the bucket was struck. The bucket then came down and struck the employee in the face. The employee sustained eye socket damage to the right side and a broken jaw.
2018-06-27Sand SpringsOklahomaWhirpool Corporation, Tulsa DivisionBODY SYSTEMSExposure to environmental heat
An employee was working in the flow coat furnace area and was hospitalized for heat stress.
2018-03-14Sand SpringsOklahomaWebco Industries, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery
An employee was working on a overhead exhaust fan when his left pinky finger was caught between the belt and pulley, amputating his finger. The fan was in operation at the time of the incident.
2018-03-09Sand SpringsOklahomaWebco Industries, Inc. - Star Center 2 DivisionFingertip(s)Caught in running equipment or machinery during regular operation
An employee was running a pointer machine when he attempted to manually move a steel tube from the index table into the bunk. His left pinky finger was then smashed between the index table and the tube, requiring a surgical amputation of the fingertip.
2017-09-21Sand SpringsOklahomaGreen Country Shredding & Recycling, Inc.Arm(s)Caught in running equipment or machinery during maintenance, cleaning
An employee climbed into the shred trailer of a truck to clean out the shred portion when his arm was caught in the truck's conveyor belt, fracturing his arm and causing skin and tissue damage. He was hospitalized.
2016-05-11Sand SpringsOklahomaOGI Process Equipment, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee's left index finger was crushed and partially amputated while the employee was operating a metal shear.